NR 440.642(10)(h)3.
3. In any hearing requested under
par. (a) 2., the presiding officer shall render his initial decision within 60 days of that request. Any appeal to the administrator shall be taken within 10 days of the initial decision, and the administrator shall render his decision in that appeal within 30 days of the filing of the appeal.
NR 440.642(11)
(11) General provisions exclusions. The following provisions of
ch. NR 440 do not apply to this section:
NR 440.642 History
History: Cr.
Register, September, 1990, No. 417, eff. 10-1-90; am. (3) (b) 1. a., (4) (h) 3. c. and (7) (i) 4. b.,
Register, July, 1993, No. 451, eff. 8-1-9
3; am. (4) (o) 3. a., (5) (c),
Register, December, 1995, No. 480, eff. 1-1-96
; corrections in (1) (c) and (4) (L) made under s. 13.93 (2m) (b) 1.,
Register, November, 1999, No. 527;
CR 06-109: r. (1) (c) and (d), (3) (a), (4) (h) and (j) 1. a. and b. and (p) 4. b. 2), (6) (c), am. (2) (m) 2., 3. and 4., (3) (b) 1. (intro.), b. and 2., (4) (e) 1. (intro.) and b., (k) 1. and 2. (intro.) and (L) 1. b., (6) (b) 9., (7) (a) 3. b. and d., (f) 3. and (j) 2. e., r. and recr. (3) (b) 1. a., (7) (i) 4. b. and (9) (e), renum. (4) (j) 1. (intro.) to be 1. and am., renum. (4) (p) 4. b. 1) to be (4) (p) 4. b. and am. Register May 2008 No. 629, eff. 6-1-08; corrections in (4) (b) 2., (o) 3. a. and 6., (6) (e) 1. a., (f), (7) (c) to (e), (i), (8) (a), (e), (10) (a) 1. a. and (d) 1. made under s. 13.92 (4) (b) 7., Stats., Register May 2008 No. 629; corrections in (9) (a), (c) and (d) 1. made under s. 13.92 (4) (b) 7., Stats.
NR 440.644
NR 440.644 Rubber tire manufacturing industry. NR 440.644(1)(1)
Applicability and designation of affected facilities. NR 440.644(1)(a)(a) The provisions of this section, except as provided in
par. (b), apply to each of the following affected facilities in rubber tire manufacturing plants that commence construction, modification, or reconstruction after January 20, 1983: each undertread cementing operation, each sidewall cementing operation, each tread end cementing operation, each bead cementing operation, each green tire spraying operation, each Michelin-A, each Michelin-B operation and each Michelin-C automatic operation.
NR 440.644(1)(b)
(b) The owner or operator of each undertread cementing operation and each sidewall cementing operation in rubber tire manufacturing plants that commenced construction, modification or reconstruction after January 20, 1983, and on or before September 15, 1987, may comply with the alternate provisions in
sub. (3) (b). This election shall be irreversible. The alternate provisions in
sub. (3) (b) do not apply to any undertread cementing operation or sidewall cementing operation that is modified or reconstructed after September 15, 1987. The affected facilities in this paragraph are subject to all applicable provisions of this section.
NR 440.644(1)(c)
(c) Although the affected facilities listed under
par. (a) are defined in reference to the production of components of a “tire", as defined under
sub. (2) (a), the percent emission reduction requirements and VOC use cutoffs specified under
sub. (3) (a) 1.,
2.,
6.,
7. b.,
8.,
9. and
10. refer to the total amount of VOC used (the amount allocated to the affected facility), including the VOC used in cements and organic solvent-based green tire spray materials for tire types not listed in the definition of “tire".
NR 440.644(2)(a)1.
1. “Bead" means rubber-covered strands of wire, wound into a circular form, which ensure a seal between a tire and the rim of the wheel onto which the tire is mounted.
NR 440.644(2)(a)2.
2. “Bead cementing operation" means the system that is used to apply cement to the bead rubber before or after it is wound into its final circular form. A bead cementing operation consists of a cement application station, such as a dip tank, spray booth and nozzles, cement trough and roller or swab applicator, and all other equipment necessary to apply cement to wound beads or bead rubber and to allow evaporation of solvent from cemented beads.
NR 440.644(2)(a)3.
3. “Component" means a piece of tread, combined tread/sidewall, or separate sidewall rubber, or other rubber strip that is combined into the sidewall of a finished tire.
NR 440.644(2)(a)4.
4. “Drying area" means the area where VOC from applied cement or green tire sprays is allowed to evaporate.
NR 440.644(2)(a)5.
5. “Enclosure" means a structure that surrounds a VOC (cement, solvent, or spray) application area and drying area, and that captures and contains evaporated VOC and vents it to a control device. Enclosures may have permanent and temporary openings.
NR 440.644(2)(a)7.
7. “Green tire spraying operation" means the system used to apply a mold release agent and lubricant to the inside and outside of green tires to facilitate the curing process and to prevent rubber from sticking to the curing press. A green tire spraying operation consists of a booth where spraying is performed, the spray application station, and related equipment such as the lubricant supply system.
NR 440.644(2)(a)8.
8. “Michelin-A operation" means the operation identified as Michelin-A in the emission standards and engineering division confidential file as referenced in Docket A-80-9, Entry II-B-12.
NR 440.644(2)(a)9.
9. “Michelin-B operation" means the operation identified as Michelin-B in the emission standards and engineering division confidential file as referenced in Docket A-80-9, Entry II-B-12.
NR 440.644(2)(a)10.
10. “Michelin-C-automatic operation" means the operation identified as Michelin-C-automatic in the emission standards and engineering division confidential file as referenced in Docket A-80-9, Entry II-B-12.
NR 440.644(2)(a)11.
11. “Month" means a calendar month or a prespecified period of 28 days or 35 days (utilizing a 4-4-5-week recordkeeping and reporting schedule).
NR 440.644(2)(a)12.
12. “Organic solvent-based green tire spray" means any mold release agent and lubricant applied to the inside or outside of green tires that contains more than 12%, by weight, of VOC, as sprayed.
NR 440.644(2)(a)13.
13. “Permanent opening" means an opening designed into an enclosure to allow tire components to pass through the enclosure by conveyor or other mechanical means, to provide access for permanent mechanical or electrical equipment, or to direct air flow into the enclosure. A permanent opening is not equipped with a door or other means of obstruction of air flow.
NR 440.644(2)(a)14.
14. “Sidewall cementing operation" means the system used to apply cement to a continuous strip of sidewall component or any other continuous strip component (except combined bead/sidewall component) that is incorporated into the sidewall of a finished tire. A sidewall cementing operation consists of a cement application station and all other equipment, such as the cement supply system and feed and takeaway conveyors, necessary to apply cement to sidewall strips or other continuous strip component (except combined tread/sidewall component) and to allow evaporation of solvent from the cemented rubber.
NR 440.644(2)(a)15.
15. “Temporary opening" means an opening into an enclosure that is equipped with a means of obstruction, such as a door, window, or port, that is normally closed.
NR 440.644(2)(a)16.
16. “Tire" means any agricultural, airplane, industrial, mobile home, light-duty truck or passenger vehicle tire that has a bead diameter less than or equal to 0.5 m (19.7 in) and a cross section dimension less than or equal to 0.325 m (12.8 in), and that is mass produced in an assembly-line fashion.
NR 440.644(2)(a)17.
17. “Tread end cementing operation" means the system used to apply cement to one or both ends of the tread or combined tread/sidewall component. A tread end cementing operation consists of a cement application station and all other equipment, such as the cement supply system and feed and takeaway conveyors, necessary to apply cement to tread ends and to allow evaporation of solvent from the cemented tread ends.
NR 440.644(2)(a)18.
18. “Undertread cementing operation" means the system used to apply cement to a continuous strip of tread or combined tread/sidewall component. An undertread cementing operation consists of a cement application station and all other equipment, such as the cement supply system and feed and takeaway conveyors, necessary to apply cement to tread or combined tread/sidewall strips and to allow evaporation of solvent from the cemented tread or combined tread/sidewall.
NR 440.644(2)(a)19.
19. “VOC emission control device" means equipment that destroys or recovers VOC.
NR 440.644(2)(a)20.
20. “VOC emission reduction system" means a system composed of an enclosure, hood, or other device for containment and capture of VOC emissions and a VOC emission control device.
NR 440.644(2)(a)21.
21. “Water-based green tire spray" means any mold release agent and lubricant applied to the inside or outside of green tires that contains 12% or less, by weight, of VOC as sprayed.
NR 440.644(2)(b)1.
1. B
o is the total number of beads cemented at a particular bead cementing affected facility for a month.
NR 440.644(2)(b)2.
2. C
a is the concentration of VOC in gas stream in vents after a control device (parts per million by volume).
NR 440.644(2)(b)3.
3. C
b is the concentration of VOC in gas stream in vents before a control device (parts per million by volume).
NR 440.644(2)(b)4.
4. C
f is the concentration of VOC in each gas stream vented directly to the atmosphere from an affected facility or from a temporary enclosure around an affected facility (parts per million by volume).
NR 440.644(2)(b)5.
5. D
c is the density of cement or spray material (grams per liter (lb per gallon)).
NR 440.644(2)(b)6.
6. D
r is the density of VOC recovered by an emission control device (grams per liter (lb per gallon)).
NR 440.644(2)(b)7.
7. E is the emission control device efficiency, inlet versus outlet (fraction).
NR 440.644(2)(b)8.
8. F
c is the capture efficiency, VOC captured and routed to one control device versus total VOC used for an affected facility (fraction).
NR 440.644(2)(b)9.
9. F
o is the fraction of total mass of VOC used in a month by all facilities served by a common cement or spray material distribution system that is used by a particular affected facility served by the common distribution system.
NR 440.644(2)(b)10.
10. G is the monthly average mass of VOC used per tire cemented or sprayed with a water-based green tire spray for a particular affected facility (grams (lb) per tire).
NR 440.644(2)(b)11.
11. G
b is the monthly average mass of VOC used per bead cemented for a particular bead cementing affected facility (grams (lb) per bead).
NR 440.644(2)(b)12.
12. L
c is the volume of cement or spray material used for a month (liters (gallons)).
NR 440.644(2)(b)13.
13. L
r is the volume of VOC recovered by an emission control device for a month (liters (gallons)).
NR 440.644(2)(b)14.
14. M is the total mass of VOC used for a month by all facilities served by a common cement or spray material distribution system (grams (lb)).
NR 440.644(2)(b)15.
15. M
o is the total mass of VOC used at an affected facility for a month (grams (lb)).
NR 440.644(2)(b)16.
16. M
r is the mass of VOC recovered by an emission control device for a month (grams (lb)).
NR 440.644(2)(b)17.
17. N is the mass of VOC emitted to the atmosphere per tire cemented or sprayed with a water-based green tire spray for an affected facility for a month (grams (lb) per tire).
NR 440.644(2)(b)18.
18. N
b is the mass of VOC emitted per bead cemented for an affected facility for a month (grams (lb) per bead).
NR 440.644(2)(b)19.
19. Q
a is the volumetric flow rate in vents after a control device (dry standard cubic meters (dry standard cubic feet) per hour).
NR 440.644(2)(b)20.
20. Q
b is the volumetric flow rate in vents before a control device (dry standard cubic meters (dry standard cubic feet) per hour).
NR 440.644(2)(b)21.
21. Q
r is the volumetric flow rate of each stream vented directly to the atmosphere from an affected facility or from a temporary enclosure around an affected facility (dry standard cubic meters (dry standard cubic feet) per hour).
NR 440.644(2)(b)22.
22. R is the overall efficiency of an emission reduction system (fraction).
NR 440.644(2)(b)24.
24. T
o is the total number of tires cemented or sprayed with water-based green tire sprays at a particular affected facility for a month.
NR 440.644(3)(a)(a) General. On and after the date on which the initial performance test, required by
s. NR 440.08, is completed, but no later than 180 days after initial startup, each owner or operator subject to the provisions of this section shall comply with the following conditions:
NR 440.644(3)(a)1.a.
a. Discharge into the atmosphere no more than 25% of the VOC used (75% emission reduction) for each month; or
NR 440.644(3)(a)1.b.
b. Maintain total (uncontrolled) VOC use less than or equal to the following levels, depending upon the duration of the compliance period:
1) 3,870 kg (8,531 lb) of VOC per 28 days.
2) 4,010 kg (8,846 lb) of VOC per 29 days.
3) 4,150 kg (9,149 lb) of VOC per 30 days.
4) 4,280 kg (9,436 lb) of VOC per 31 days.
5) 4,840 kg (10,670 lb) of VOC per 35 days.
NR 440.644(3)(a)2.a.
a. Discharge into the atmosphere no more than 25% of the VOC used (75% emission reduction) for each month; or
NR 440.644(3)(a)2.b.
b. Maintain total (uncontrolled) VOC use less than or equal to the following levels, depending upon the duration of the compliance period:
1) 3,220 kg (7,099 lb) of VOC per 28 days.
2) 3,340 kg (7,363 lb) of VOC per 29 days.
3) 3,450 kg (7,606 lb) of VOC per 30 days.
4) 3,570 kg (7,870 lb) of VOC per 31 days.
5) 4,030 kg (8,885 lb) of VOC per 35 days.
NR 440.644(3)(a)3.
3. For each tread end cementing operation: Discharge into the atmosphere no more than 10 grams (0.022 lb) of VOC per tire cementing for each month.
NR 440.644(3)(a)4.
4. For each bead cementing operation: Discharge into the atmosphere no more than 5 grams (0.011 lb) of VOC per bead cemented for each month.
NR 440.644(3)(a)5.
5. For each green tire spraying operation where only water-based sprays are used, do both of the following:
NR 440.644(3)(a)5.a.
a. Discharge into the atmosphere no more than 1.2 grams (0.0026 lb) of VOC per tire sprayed with an inside green tire spray for each month.
NR 440.644(3)(a)5.b.
b. Discharge into the atmosphere no more than 9.3 grams (0.021 lb) of VOC per tire sprayed with an outside green tire spray for each month.
NR 440.644(3)(a)6.
6. For each green tire spraying operation where only organic solvent-based sprays are used:
NR 440.644(3)(a)6.a.
a. Discharge into the atmosphere no more than 25% of the VOC used (75% emission reduction) for each month; or
NR 440.644(3)(a)6.b.
b. Maintain total (uncontrolled) VOC use less than or equal to the following levels, depending upon the duration of the compliance period:
1) 3,220 kg (7,099 lb) of VOC per 28 days.
2) 3,340 kg (7,363 lb) of VOC per 29 days.
3) 3,450 kg (7,606 lb) of VOC per 30 days.
